Nearly all of the time, companies would spend a lot of money to purchase their lift trucks. It is vital, therefore to take good care of your machinery to protect your investment into the long run. It is a great idea to know the procedures which are carried out during maintaining and taking care of this equipment.
Amongst the best ways to tell how good the engine is running is by starting the forklift up and listening carefully to see how it works. Like for example, if there are any knocks or misses, the machinery is faulty and this should raise some issues. What's more listen closely for any squealing sounds which come from the belts since these sounds would provide you with a wealth of information.
When performing maintenance, several of the main parts you would need to pay attention to comprise the horn, safety warning devices, the lights, the gauges and the overhead guard. Any faulty components or burnt out light bulbs must be replaced as soon as they are noticed. It is also imperative to inspect the wiring.
The battery compartment terminals must be cleaned after the above components have been checked thoroughly. If the terminals are not clean, be sure to clean them well. Each and every battery cell must be inspected in order to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the equipment and then change the filters. The hydraulic filter, the transmission filter and the fuel filters must be frequently replaced. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
Once the oil change has been carried out and new filters have been fitted, visually inspect the drive axle from underneath the equipment. Be certain to grease the axle if there is any grease fitting. Check the engine belts for any frays or cracks. If you find any, fix the issue accordingly. Afterwards, inspect every other part of the machinery including the wheels. If any kind of problem or fault is detected, be sure to address it immediately so as to make sure the machine is running at its safest and optimum levels.