Used Cushion Tire Forklift Michigan - Most forklifts are classified by the kind of work they do and some are classified by their type of tires. Pneumatic and cushion tires provide the 2 distinct forklift classifications.
It is vital to note that there are benefits and drawbacks to both types of forklift tires; cushion and pneumatic. The drawbacks and benefits of cushion tire models can be only compared when the drawbacks and benefits of the pneumatic tires are also discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires feature solid rubber that is either smooth or treaded and fixed or positioned around a baseband or metal ring. These kinds of forklift tires are cheaper to make and easier to maintain. Cushion tires have been designed to work on smooth surfaces such as interior loading docks and warehouse floors. Cushion tires make travelling in tight locations much easier to navigate around corners due to their tight radius. Forklifts that use cushion tires can be lower to the ground compared to pneumatic tire models and the increase in vertical clearance is welcome for many applications. It is important to note that cushion tires do not offer as much traction compared to pneumatic models and this is noticeable on wet locations and outdoor surfaces.
Cushion tires forklifts are commonly used for organizing inventory, moving items to and from different loading docks, unloading shipments and similar applications.
Pneumatic Tires
Pneumatic tires are mainly utilized on uneven surfaces and rougher terrain. These tires fall into two categories: standard air pneumatic or solid resilient pneumatic.
The difference between these two pneumatic categories is that the first is made entirely of rubber, while the latter is a layered rubber, filled with air.
For locations with uneven surfaces and unpaved ground, pneumatic tire forklifts are prime choices. The solid resilient pneumatic forklift tires are best used in areas such as lumber yards or junkyards and construction sites where there may be sharp metal items on the ground which could puncture the tires.
Benefits of Cushion Tire Forklifts
Forklifts that use cushion tires are a wise option for interior and exterior locations that feature smooth surfaces. The majority of forklifts that rely on cushion tires are used mostly indoors with limited outdoor use. Cushion tire forklifts are commonly used in warehouses and manufacturing plants. Cushion tire models excel in tight locations including narrow aisles and accessing high shelves.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Most cushion tire forklifts intended for indoor use are electric, which means they are usually smaller and more maneuverable because they do not required the extra room needed to accommodate the larger internal combustion engine.
2) Lower Clearance
Indoor cushion tire forklifts have lower clearance compared to pneumatic models; allowing the machine to travel easier through doorways and around lights or sprinkler obstacles.
3) Durability
Durability is a key feature with cushion tire forklift models as they are simple to maintain and offer zero to little risk of being punctured.
4) Quiet
Cushion tire forklifts do not use an internal combustion engine and instead rely on a battery or fuel cell, making them significantly quieter than their propane or diesel cousins.
5) Environmentally Friendly
Powered by electricity instead of relying on an internal combustion engine enables cushion tire forklifts to make zero dangerous emissions.
Forklift Tire Choice
The majority of forklift frames specify either a pneumatic tire or a cushion tire. Tires and axles are specific to the lifting capacity and the machine’s frame. Forklift manufacturers create models that safely operate with certain tires and wheels, typically pneumatic tires or cushion tires. Due to their special tire design, it is best to choose the forklift type that will suit the job in terms of forklift tire types.
Workplace Applications
Suitable Work Applications for Cushion Tires
Cushion tire forklifts are usually the best option for many workplace applications. If most of the transporting, lifting loads and placement happens inside or with limited outdoor use on smooth surfaces, cushion tire forklifts are your best choice.
Forklifts fitted with cushion tires often have a smaller frame and sit much lower to the ground than forklifts fitted with pneumatic tires. Cushion tire models can fit through doorways easier and avoid overhead obstacles. However, cushion tire forklifts also have less clearance to the ground which can result in cushion tire forklifts getting easily hung up on outdoor obstacles where the surface is not cleared or even. One solution to this problem is to fit the cushion tire forklift with traction tires on the front of their forklifts. Tires that offer traction will perform better on wet surfaces, rough terrain, packed gravel and asphalt. Traction tires are not used on dirt or grass locations and need to be installed on opposite sides, the drive and steer axles.
One of the largest advantages of using a forklift with cushion tires is the smaller turning radius. Their ability to work in compact locations makes cushion tire forklifts excellent for warehousing and manufacturing operations. Areas that are designed with narrow aisles such as warehouse facilities will enjoy the tighter turning radius offered with cushion tire forklift models. Cushion tire forklifts are more cost-effective and available compared to pneumatic tire models.
Suitable Work Applications for Pneumatic Tire Forklifts
Since pneumatic tires contain air, these forklifts are better suited for exterior applications. Interior applications may use pneumatic tire forklift models although they will not provide the maneuverability, lower clearance or tighter turning radius. Of course, they are often powered by internal combustion engine so do produce harmful emissions which are not recommended for normal indoor use. Measuring wider and longer in comparison to cushion tire forklifts, pneumatic tire models are mostly utilized outside.
Of the two types of pneumatic tires, the solid pneumatic tire is more expensive than the air pneumatic tire. The solid pneumatic tire is comprised of solid rubber without any air inside, making this type more resilient against gouges or punctures. Outdoor areas including lumber yards and scrap yards that feature copious amounts of metal debris and nails often rely on solid pneumatic tires. Air-filled pneumatic tires work well on gravel and asphalt exterior surfaces. The main issue with air pneumatic tires is their ability to become gouged or punctured. It is essential to ensure the work site is free from any sharp materials before using a forklift with air pneumatic tires. Since air-filled tires deliver a bouncy sensation, they contribute to operator fatigue and discomfort. Due to this, numerous air pneumatic forklift users fill foam in their tires. This provides a smoother ride for the operator than the one experienced on solid pneumatic tires but also a less bouncy ride than air filled pneumatic tires. Foam filling is also used to help prevent flat tires. Filling an air pneumatic tire with foam usually takes approximately 3 days to fill and cure.
Difference in Load Capacity
The load capacity on for pneumatic tire forklifts and cushion tire forklifts are fairly equal. There may be lift limits on certain electric-powered cushion tire models. However, cushion and pneumatic tire forklifts can basically be obtained with just about any load capacity. There are numerous load capacities ranging from less than 2000 pounds to more than 200,000 pounds.
Cushion Tire Forklift PDF
